Snappy Teak Nu #2 is part two of a two part teak cleaning system. Please only use #2 in conjunction with Snappy Teak Nu #1. Directions: Wet teak & surrounding area. Put on rubber gloves & goggles. Pour #1 into a pail. It can be diluted up to 4 to 1 or used full strength. With wood still wet, pour #1 onto teak or apply with brush/scouring pad. Lightly scrub in circular motion. Once the entire surface turns blackish, let it set in for 2-3 mints. While waiting, read our NOTE! And repeat steps 3-5 with formula #2. NOTE! When applying formula #2 use a NEW pail, brush/scouring pad set or rinse the old ones thoroughly! Formula #1 is an acid & #2 is a base. They will neutralize each other upon contact. This chemical reaction needs to happen in the teak, not in your pail or brush. This is also why it’s important to use both #1 & #2 formulas to leave your wood looking brand new. Once #2 has been rubbed into the same teak as #1, the work is done. Rinse everything off and your teak will look brand new! If you want to stain or seal your teak, wait 24 hrs. for teak to dry and then apply sealer within the following 24 hr. window. After 48 hrs. the teak fibers begin to close up and the stain or sealer won’t apply as well.
- 1 Gallon